This week we are going to talk about the Volume Control CVs in Tsunami2 and Econami Digital Sound Decoders. Watch now to learn how to set the volume of every single sound effect in your decoders! CVs Used in This Video: CV 128: Master Volume CVs 129-160: Primary Mixer Volume Levels (129-150 in Econami) | SoundTraxx
2:42
This week we are going to talk about the Volume Control CVs in Tsuna…
已浏览 2965 次2020年1月10日
FacebookSoundTraxx
Let's dive a little deeper into function mapping with SoundTraxx decoders! In this video, we will talk about what function mapping is, how it works, and SoundTraxx exclusive Flex-Map function mapping. Learn more about the features we have packed into our Tsunami2 Digital Sound Decoders: http://soundtraxx.com/products/tsunami2-digital-sound-decoders CVs used in this video: CV 32: Indexed CV Page 1 CV 1.257: Headlight Function Mapping CV 1.297: Whistle Function Mapping CV 1.298: Bell Function Mapp
6:57
Let's dive a little deeper into function mapping with SoundTrax…
已浏览 1848 次2019年8月16日
FacebookSoundTraxx
Did you know that Athearn, Bachmann and other locomotive manufacturers have locomotives available with SoundTraxx decoders factory equipped? This means you don't have to worry about installing a decoder to access all of the features that SoundTraxx decoders have to offer. That's right these are not simplified or 'dumbed down' decoders. If a model says it is equipped with a Tsunami2 or an Econami decoder, you are getting the full featured version of that decoder. Now these decoders are not 100% t
4:40
Did you know that Athearn, Bachmann and other locomotive …
已浏览 570 次2021年11月5日
FacebookSoundTraxx
At SoundTraxx we offer a wide-range of accessories to help make your installs go smoothly and your model run just like the real thing. One of our favorite accessories is a CurrentKeeper. A CurrentKeeper is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. We offer the CurrentKeeper in two sizes: the original CurrentKeeper and the Curre
4:22
At SoundTraxx we offer a wide-range of accessories to help mak…
已浏览 2050 次2021年5月1日
FacebookSoundTraxx
This week, George dives into factory-installed SoundTraxx decoders. Many brands, including Bachmann and Athearn, install full-featured Econami or Tsunami2 decoders straight from the factory. While these decoders offer the same capabilities as aftermarket versions, manufacturers often choose different default sounds and feature settings. Wondering what those settings are? You’ll find them all in the Factory Installed Decoders section of our website. Watch now to learn more! Links from the Support
7:13
This week, George dives into factory-installed SoundTraxx dec…
已浏览 321 次6 个月之前
FacebookSoundTraxx
With Tsunami2 and Econami Digital Sound Decoders you don't need a cam to get the perfect chuff timing out of your steam models! That's right skip the cam install and simply change a CV to keep your chuff in-time with the drivers. CVs used in this video: CV 114: Engine Exhaust Control Adjust the cadence of the exhaust chuff to match your locomotive’s wheel rotations with CV 114. Entering values from 1 to 255 into CV 114 will determine the chuff rate. High values indicate more rapid chuffs, and lo
3:35
With Tsunami2 and Econami Digital Sound Decoders you don't need a …
已浏览 5577 次2019年4月12日
FacebookSoundTraxx
Did you know that you can automatically trigger sound and lighting effects based on your locomotives speed and direction with Tsunami2 and Econami decoders? With a few quick CV adjustments you can have your train running more realistically than ever before. Watch now to learn how! CVs used in this video: CV 32: CV Index 2 CVs 1.385-1.512: Effect Auxiliary Map Registers | SoundTraxx
3:41
Did you know that you can automatically trigger sound and li…
已浏览 2884 次2020年1月25日
FacebookSoundTraxx
11:34
SoundTraxx decoders come pre-loaded with high-quality sound file…
已浏览 7027 次3 个月之前
FacebookSoundTraxx
1:00
With over 2.2 billion possible sound combinations, Tsunami2 and Blun…
已浏览 1234 次2 个月之前
FacebookSoundTraxx
How do you adjust the settings on your decoder? The answer is CVs…
已浏览 378 次7 个月之前
FacebookSoundTraxx
2:08
SoundTraxx Safety Net: CV Reset
已浏览 9667 次2018年2月24日
YouTubeSoundTraxx
28:23
Programming LokSound Decoders (185)
已浏览 3.3万 次2021年4月19日
YouTubeModel Railroading
8:45
SoundTraxx PTB-100 & Programming Track Tips
已浏览 4426 次2019年12月7日
YouTubeSoundTraxx
22:37
Uploading Sounds To A Digitrax Decoder (195)
已浏览 1.4万 次2021年5月28日
YouTubeModel Railroading
8:34
SoundTraxx Introduction to CVs (Configuration Variables)
已浏览 2953 次2021年3月22日
YouTubeSoundTraxx
40:14
Introduction to DCC Operation & CV Programming (Webinar 9)
已浏览 1.7万 次2019年8月21日
YouTubeSoundTraxx
6:41
SoundTraxx Function Mapping: Set up Your Cab, YOUR Way
已浏览 1万 次2018年4月7日
YouTubeSoundTraxx
1:46
Introducing the SoundTraxx Tsunami SoundCar Digital Sound …
已浏览 2.5万 次2014年6月6日
YouTubeSoundTraxx
22:38
New SoundTraxx Decoder And Steam Installation (192)
已浏览 1.2万 次2021年5月17日
YouTubeModel Railroading
7:48
Choosing a Sound Profile on SoundTraxx Tsunami2 Decoders
已浏览 3194 次2021年4月25日
YouTubeSoundTraxx
4:50
Tsunami2 New TSU-N18 Decoder install into a Walther's Proto 2000 …
已浏览 5178 次2021年7月2日
YouTubeSoundTraxx
7:29
Tsunami2 Sound Tools to make your Locomotive Sound more Rea…
已浏览 1.2万 次2020年2月21日
YouTubeSoundTraxx
30:46
Step-by-Step Tsunami2 TSU-2200 decoder install in an Athearn RTR …
已浏览 1.2万 次2020年9月21日
YouTubeSoundTraxx
39:37
Tsunami2 TSU-2200 Decoder Install in a Broadway Limited Mikado 2-8-2
已浏览 2万 次2020年8月22日
YouTubeSoundTraxx
7:29
SoundTraxx CV Reset
已浏览 4480 次2022年7月10日
YouTubeSoundTraxx
7:44
SOUNDTRAXX Hyperlight Tutorial
已浏览 2842 次2021年5月10日
YouTubeSoundTraxx
5:47
SoundTraxx CV Lock
已浏览 1757 次2019年6月1日
YouTubeSoundTraxx
2:49
SoundTraxx Volume Control
已浏览 4400 次2018年3月5日
YouTubeSoundTraxx
4:48
SoundTraxx Volume Control
已浏览 5056 次2019年9月29日
YouTubeSoundTraxx
4:30
SoundTraxx Troubleshooting Tips
已浏览 7327 次2019年9月1日
YouTubeSoundTraxx
观看更多视频
静态缩略图占位符